Service Hotline:400-688-3551
Home » News Center » Industry News » How to clean the plate washable filter

How to clean the plate washable filter

Views: 1     Author: Site Editor     Publish Time: 2020-11-11      Origin: Site

Plate washable filter

Filters are very common in modern industrial production and life. They can effectively separate the media to meet the process requirements.Plate washable filterIt is one of the representative products, which has very good technical characteristics and is easy to clean. Below we will mainly introduce this type of product and cleaning methods.

The outer frame of the washable plate filter is sturdy and removable. It adopts a sturdy plate-type aluminum alloy frame with aluminum alloy corners. The structure is sturdy and stable to ensure that the filter will not be deformed or damaged in a poor working environment. The disassembly design is convenient to replace the filter material to achieve the purpose of frame reuse. Lightweight plate structure, high-quality polyester synthetic fiber filter material, low initial resistance and good fire resistance. The filter net reinforcement further enhances the firmness of the filter. At the same time, the balanced spacing and double stiffener design ensure the equal-height pleat shape of the filter screen, so that the plate filter can reach the maximum dust holding capacity when the resistance is minimum.

Compared with ordinary glass fiber mesh or man-made fiber filter, the filter has a stronger filtering effect and service life; the design of the galvanized iron mesh can protect the filter material from damage and effectively prevent the filter material from deforming due to pressure; it can be used to protect the air conditioning system Medium-high, medium and primary efficiency filters; the filter has the characteristics of low pressure loss, large dust capacity, and long service life.

Open the suction grille in the device, hold down the buttons on both sides and pull down gently, drag the hook on the air filter to pull the device obliquely downwards, use a device similar to a vacuum cleaner to remove the dust from it, or rinse with warm water. If there is too much dust, you can use a soft brush and a neutral detergent to clean it. After cleaning, dry the water and place it in a cool place to dry. Never use hot water above 50℃ for cleaning to avoid equipment Discoloration or deformation, do not dry on the fire. After cleaning, be sure to put on the equipment. When installing, hang the equipment on the upper part of the suction grille, and then fix it on the suction grille. The rear handle of the suction grille slowly slides inward until the entire device is pushed into the grille. The last step is to close the suction grille. This is the opposite of the first step. Press and hold the filter signal on the control panel to reset key.

Plate washable filterIt is widely used in our daily life. It is a type of equipment that has been used in many types of filter products. When choosing to use, users must proceed according to the characteristics of the product. Through the above introduction to the filter and cleaning method The introduction, I hope it can help users in choosing and using.               Mobile: 13355281100
Service Hotline: 400-688-3551
Telephone: 0533-6217678
Factory Address: No. 16 Heilongjiang Road, Economic Development Zone, Liaocheng City, Shandong Province
Factory Address: West End of Weisi Road, Linzi District, Zibo City, Shandong Province
Leave a Message
Online Consultation
Copyrigh ©2019 Shandong Snyli [Snyli Environmental Technology (Shandong) Co., Ltd., Shandong Snyli Purification Technology Co., Ltd.] All Rights Reserved.
Lu ICP No. 16035622-1  Technical Support:Yi Qilai