HVAC heating, ventilation, and air -conditioning systems are general names that can regulate the environment by controlling temperature, relative humidity, air movement and air quality (including fresh air, gas particles and gas). The air purification system can reduce or increase the temperature, reduce or increase air humidity and moisture, and reduce the content of granular smoke and dust pollutants in the air.
Clean work shed is a simple clean room for fast and convenient, clean work sheds with a variety of clean levels and space matching, and can be made according to the use requirements, so it is easy to use elastic installation easy and short-moving short and movable Its main feature, clean work sheds can also reduce costs for localization of high cleanrooms in the normal level of clean room to reduce costs.
The personnel closing channels entering the production area of clean workshops should set corresponding elsewear facilities according to the production properties, product characteristics, product requirements, etc., and rationally design air flow tissue, set differential pressure and monitoring equipment to meet dust-free The requirements of the workshop on purifying clothes. Factors that need to be considered 1. The settings between the cloak room will be separated by the different stages of the dress, such as switching shoes (take off the whole clothes), wear clean clothes (wear aseptic underwear, sterile coat)
Air showerWhat should I pay attention to when maintaining?Below byXiaobian of Shandong snyli PurificationDetails to youIntroduction-Air showerseveralMaintenance method:1. Regularly use the instrument to determine the technical indicators of the equipment, and if it does not meet the technical parame
Laminar flow hood is one of the equipment that can shield and isolate the operator from the product, and its main purpose is to avoid product contamination. The air sucked from the clean room is then passed through the operating area vertically through the HEPA filter by a fan installed in the top pressurized cabin to provide ISO 5 (level 100) unidirectional air flow for critical areas. The exhaust gas is discharged from below and returns to the clean room area. It is mainly composed of cabinet, fan, high efficiency air filter, damping layer, lamps and so on. There are two types of clean laminar flow hoods: inside the fan and outside the fan, and there are two installation methods: suspension type and floor stand type. Cleanliness: Dust with a particle size of ≥0.5μm in the working area ≤3.5 particles/liter (FS209E100) Noise: ≤65 Db(A) Average wind speed: 0.36-0.54m/s The clean laminar flow hood compares with the clean room. Low investment, quick results, low requirements for plant civil construction, convenient installation, power saving and other advantages, widely used in precision machinery