Service Hotline:400-688-3551
Home » News Center
— News Center 

Recommended Products

Product characteristics: high wind volume, high static pressure, high efficiency, low noise Multiple safety devices: current overload protection loop, fault indication Humanization skills: attached handles, handling installation, beautiful body appearance Product model: SL-15CDCZAN1
0
0
Mainly used for terminal filtration in electronics, biopharmaceutical industries and hospitals where high cleanliness is required.

Frame material: anodized aluminum profile

Frame thickness: 50mm, 70mm, 90mm

Product model: GWB-4.5A, GWB-9A, GWB-18A, GWB-4.8A

GWB-10.3A, GWB-13A, GWB-15.7A, GWB-21A, GWB-

4.5B
0
0
Mainly used for terminal filtration in electronics, biopharmaceutical industries and hospitals where high cleanliness is required.

Frame material: anodized aluminum profile

Frame thickness: 50mm, 70mm, 90mm

Product attributes: SWB-4.5A, SWB-9A, SWB-18A, SWB-2.9A

SWB-6A, SWB-7.6A
0
0
It is mainly used for terminal filtration in applications requiring high cleanliness, such as electronics, biopharmaceutical industry and hospitals.

Frame material: aluminum alloy, galvanized sheet, wooden board, stainless steel

Frame thickness: 150mm, 220mm, 292mm

Product model: GHB-2.5A, GHB-5A, GHB-10A, GHB-15A

GHB-20A, GHB-5B, GHB-10B
Coarse dust filtration system for general building air conditioning. Primary filtration of industrial-grade air ventilation equipment.

Frame material: galvanized frame, aluminum alloy frame or stainless steel frame

Frame thickness: 10, 21, 46, 96, etc.

Product model: CJ-17A, CJ-34A, CJ-17B, CJ-34B
Ventilation systems for office buildings, meeting rooms, hospitals, shopping malls, stadiums, airports and other large civil buildings.

Outer frame material: aluminum alloy frame, can be made into a whole group with handle interconnection, easy and safe to replace

Frame thickness: 10, 21, 46, 96, etc.

Product model: CN-24A, CN-28.5A, CN-34A, CN-17B, CN-

24B, CN-28.5B, CN-34B, CN-17C, CN-24C, CN-28.5C

CN-34C
Product features: no partition design, lower running resistance, wide application range, compact structure, saving storage space

Product application: In the high-efficiency air outlet of the clean room of the pharmaceutical plant, the FFU products of the purification plant are equipped with high-efficiency filters

Efficiency: 99.97%@0.3μm (H13); 99.99%@0.3μm (H14);

Product model: GPW-8-470-D, GPW-8-1000-D, GPW-8-

260-D, GPW-8-550-D, GPW-9.3-470-B
Contact Us
Tel: +86 13355281100
phone: 400-688-3551
fax: 0531-82076779
mailboxsales@snyli.com
Factory Address: No. 16 Heilongjiang Road, Economic Development Zone, Liaocheng City, Shandong Province
Factory Address: West End of Weisi Road, Linzi District, Zibo City, Shandong Province

Purification equipment series

Knowing that you are interested in Purification equipment series, we have listed articles on similar topics on the website for your convenience. As a professional manufacturer, we hope that this news can help you. If you are interested in learning more about the product, please feel free to contact us.
  • Frequent six causes for wind shower
    2022-02-25

    In the process of using the wind chamber, it is sometimes encountered in the wind. The following points are several cases often encountered by daily customers, and the reference can be referred to (1) first check the power switch and Whether the emergency stop switch is on state, if two reasons are not, check the circuit and the leakage switch is closed. (2) Whether the FUSE fuse configured by the IC board is blown, such as the fuse of the fuse, the 4A fuse is required. (3) Check if the micro switch and the photoelectric switch move, if there is no action, the micro switch and photoelectric switch should be replaced. (4) If the AC contactor does not work, it affects the blow, and the AC contactor is required. (5) If the circuit board cannot output a signal in an AC contactor coil, it is necessary to change the IC circuit board. (6) When the wind shower is blowing, it is not allowed to force the door. If the emergency situation is encountered, the shutdown can be turned off. After more than ten years of industry experience, the new environment is always

  • Use and management of air shower
    2020-08-28

    The air shower room is a necessary passage for people to enter the clean room. It can reduce the pollution problems caused by people entering and leaving the clean room, and reduce the large amount of dust particles caused by the entry and exit of people/goods. A fully functional installation at the entrance of the clean room\"Airlock room\" can reduce the number of air pollution particles. When people/goods pass through the air shower, the pollution particles are shot out by the highly clean air with high efficiency filtration. The high wind speed above 25m/s ensures effective injection and Drifting particles are basically filtered out through the primary and high-efficiency two-stage filters.

  • How to maintain the clean shed in the purification workshop
    2020-08-17

    About purification workshopClean shedHow to clean and maintain, Shandong snyli Purification points out the following:1. Replace the special anti-static clothing, wear a hat and a mask, and enter the clean room after removing the dust through the wind bath dust collection channel.2. After preparing t

  • Application of curtain clean shed
    2020-08-10

    Curtain typeClean shedAs a local clean area equipment with low investment, fast implementation, high performance and low energy consumption, it is welcomed by users. First of all, this horizontal tube filter originated from20century50At the time of the Soviet Union, they did not have a foldable hi

  • The difference and difference between clean shed and clean room
    2020-08-08

    Clean shed与Both of the clean room are used to form a clean working environment, but there are still many people who confuse the clean room with the clean room and think that the clean room is the clean room. In fact, there is still a big difference between the two.1.They use different materialsClean

Website:www.snyli.com               Mobile: 13355281100
Service Hotline: 400-688-3551    Mailbox:sales@snyli.com
Telephone: 0533-6217678
Factory Address: No. 16 Heilongjiang Road, Economic Development Zone, Liaocheng City, Shandong Province
Factory Address: West End of Weisi Road, Linzi District, Zibo City, Shandong Province
Leave a Message
Online Consultation
Copyrigh ©2019 Shandong Snyli [Snyli Environmental Technology (Shandong) Co., Ltd., Shandong Snyli Purification Technology Co., Ltd.] All Rights Reserved.
Lu ICP No. 16035622-1  Technical Support:Yi Qilai