Service Hotline:400-688-3551

Air shower

Product overview: The microprocessor controller, one of the main features of the HAS series of air showers, can bring customers a greater degree of operation autonomy and a higher degree of accuracy

Structural features: The main material is composed of galvanized steel or stainless steel that is clean and dust-free.

Product model: HAS-10, HAS-20 HAS-30
Quantity:

product description:

The microprocessor controller, one of the main features of HAS series air shower room, can bring customers to a greater degree

Operational autonomy and a higher degree of accuracy. Different from the fixed operating mode of the conventional air shower,

HAS series air shower room allows users to choose three different operating modes.

Three air shower operation modes:

One-way interlock operation mode: personnel can only enter the clean area through the air shower. The inner air shower door (on the side of the clean room) is electromagnetically locked, clean

The electromagnetic lock of the outdoor side door opens. When personnel enter the rear and outer doors, the electromagnetic lock is locked, and the air shower cycle begins. After the wind shower, the outer door electromagnetic lock protects

In the locked state, the inner door lock is opened, and personnel can open the inner air shower door to enter the clean area; when the inner door is closed, the electromagnetic station

Automatic locking, open the electromagnetic lock of the side door of the clean room.

Two-way interlocking and one-way operation mode: personnel are allowed to enter and exit the clean area from the air shower. The electromagnetic locks of the two doors are usually in the open state.

A door can be opened. When a person opens the outer door and enters, the air shower cycle begins, and both electromagnetic locks are in a locked state. Wind lymph node

After beaming, the door lock is opened and personnel can enter the clean room area. When personnel leave the clean area from the air shower, the fan will not be started.

Two-way interlock operation mode: personnel are allowed to enter and exit the clean area from the air shower. The electromagnetic locks of the two doors are usually in the open state, only one of them

The door can be opened, and personnel entering the air shower room from either side will start the air shower cycle.

Structural features:

The main body is made of galvanized steel or stainless steel that is clean and dust-free. The surface of the steel plate is attached with a heat-treated epoxy anticorrosive powder coating.

The stainless steel nozzle with adjustable direction is durable.

The reinforced design aluminum door frame is equipped with toughened glass doors and windows, which is more durable.

The integrated design of industrial-grade electromagnetic lock is safe and reliable.

The emergency pause switch is installed on both sides of the air shower room, and the internal and external door locks can be opened immediately in an emergency.

The main disconnect switch is installed in the air shower area, the staff can immediately stop the air shower room in an emergency, and open the internal and external door locks at the same time.

The indicator lights are installed on both sides of the air shower room, which can supervise the staff to enter and exit the clean room in an orderly manner.

The electronic ballast fluorescent lamp consumes less energy than the usual inductive ballast, and the homogenizer makes the light in the air shower room evenly distributed.


Specifications:

Air shower

Online Consultation
Contact Us
Tel: +86 13355281100
phone: 400-688-3551
fax: 0531-82076779
mailboxsales@snyli.com
Factory Address: No. 16 Heilongjiang Road, Economic Development Zone, Liaocheng City, Shandong Province
Factory Address: West End of Weisi Road, Linzi District, Zibo City, Shandong Province
Website:www.snyli.com               Mobile: 13355281100
Service Hotline: 400-688-3551    Mailbox:sales@snyli.com
Telephone: 0533-6217678
Factory Address: No. 16 Heilongjiang Road, Economic Development Zone, Liaocheng City, Shandong Province
Factory Address: West End of Weisi Road, Linzi District, Zibo City, Shandong Province
Copyrigh ©2019 Shandong Snyli [Snyli Environmental Technology (Shandong) Co., Ltd., Shandong Snyli Purification Technology Co., Ltd.] All Rights Reserved.
Lu ICP No. 16035622-1  Technical Support:Yi Qilai