Service Hotline:400-688-3551
Home » News Center » Industry News » Analysis of the key points of purchasing medium-efficiency air filters

Analysis of the key points of purchasing medium-efficiency air filters

Views:2     Author:Site Editor     Publish Time: 2021-01-04      Origin:Site

With the modern production technology of various industries and the cleanliness requirements of the experimental environment, many laboratories and production workshops of various industries now require dust filtration. Medium-efficiency air filters are widely used in clean workshops in major industries such as biopharmaceuticals, laboratories, medical institutions, electronics industry, precision manufacturing, semiconductors, and automobile manufacturing. The following editor of snyli Purification will explain some points of reference for purchasing medium-efficiency air filters:

According to the standard requirements of purification

1. If the indoor requirement is ultra-clean purification, a combination of primary, medium and high-efficiency three-stage purification and filtration should be used;

2. If medium purification is required in the room, the primary and medium-efficiency two-stage filters should be used to cooperate with each other;

3. If the room requires general purification, the primary filter can be used.

Familiar with the characteristics of the filter

The so-called characteristics mainly refer to various factors such as filtration efficiency, resistance, penetration rate, dust holding capacity, filtration wind speed and processing air volume. When conditions permit, high efficiency, low resistance, large dust holding capacity, and Equipment with moderate wind speed, large processing capacity, convenient installation and moderate price.

Determine outdoor air quality

Because the filters we use indoors are mainly to filter and purify outdoor air into the room, the quality of outdoor air is also a very important basis, especially the amount of dust. But in the multi-stage purification and filtration process, when choosing a pre-filter, it must be combined with various factors such as the use environment, operating energy consumption, and maintenance methods, and make a decision after comprehensive consideration.

Analyze the properties of dusty gases

Analyze the nature of the dust-containing gas you want to treat and purify, which mainly includes temperature, humidity, acid and alkali, and the amount of organic solvents, because many filters are allowed to be used at high temperatures, and some filters can only be used in Work under normal temperature and humidity.

Shandong snyli Purification Technology Co., Ltd. was founded in 2010 and has more than 10 years of experience in the purification industry. It is a high-tech enterprise integrating R&D, design, production and sales. It has more than 10,000 square meters of independent workshops, more than 3,000 square meters of dust-free production workshops, and many branches across the country. It has developed into a professional manufacturer in the northern region and a well-known brand in the air purification industry. Welcome to buy all kinds of products (all kinds of products support non-standard customization) and business consultation. Our excellent products and attentive service give you no worries.


Website:www.snyli.com               Mobile: 13355281100
Service Hotline: 400-688-3551    Mailbox:sales@snyli.com
Telephone: 0533-6217678
Factory Address: No. 16 Heilongjiang Road, Economic Development Zone, Liaocheng City, Shandong Province
Factory Address: West End of Weisi Road, Linzi District, Zibo City, Shandong Province
Copyrigh ©2019 Shandong Snyli [Snyli Environmental Technology (Shandong) Co., Ltd., Shandong Snyli Purification Technology Co., Ltd.] All Rights Reserved.
Lu ICP No. 16035622-1  Technical Support:Yi Qilai