Service Hotline:400-688-3551
Home » News Center » Industry News » Maintenance and maintenance methods of primary filter

Maintenance and maintenance methods of primary filter

Views:1     Author:Site Editor     Publish Time: 2020-12-27      Origin:Site

Primary filterWhat are the specific maintenance and maintenance methods? The editor of snyli Purification will explain to you the following points in detail:


1. The core part of the primary filter is the filter element. The filter element is composed of a filter frame and a stainless steel wire mesh. The stainless steel wire mesh is a wearable part and needs special protection;


2. After the initial efficiency filter has been working for a period of time, certain impurities have precipitated in the filter core. At this time, the pressure drop will increase and the flow rate will decrease. The impurities in the filter core must be removed in time;


3. When cleaning impurities, pay special attention to the stainless steel wire mesh on the filter element not to be deformed or damaged. Otherwise, if the filter is installed, the purity of the medium after filtration does not meet the design requirements, and the compressor, pump, instrument and other equipment will suffer To destroy


4. If the stainless steel wire mesh is found to be deformed or damaged, it needs to be replaced immediately.


Website:www.snyli.com               Mobile: 13355281100
Service Hotline: 400-688-3551    Mailbox:sales@snyli.com
Telephone: 0533-6217678
Factory Address: No. 16 Heilongjiang Road, Economic Development Zone, Liaocheng City, Shandong Province
Factory Address: West End of Weisi Road, Linzi District, Zibo City, Shandong Province
Copyrigh ©2019 Shandong Snyli [Snyli Environmental Technology (Shandong) Co., Ltd., Shandong Snyli Purification Technology Co., Ltd.] All Rights Reserved.
Lu ICP No. 16035622-1  Technical Support:Yi Qilai