Views:0 Author:Site Editor Publish Time: 2020-09-17 Origin:Site
For ease of useAir showerEach layer is coated with a unique high-viscosity or low-viscosity adhesive. The product size is suitable for different positions. The digital label promotes the separation between the sheet and the multilayer, straight-faced adhesive floor mat, which can quickly and effectively remove the dust carried by the wheels and the vehicle chassis, keep the environment clean, easy to use, and the surface is flat and contaminated, and the layer is torn off. The sticky pad is mainly suitable for being placed in the air shower room at the entrance of the clean space. It can effectively remove dust on shoe soles and wheels, greatly reducing the impact of dust on the quality of the clean environment, so as to achieve the effect of simple dust removal. It solves the problem of incomplete dust removal of other floor mats and no guarantee of dust removal.
As we all know, the high efficiency filter used in the air shower is a consumable and needs to be replaced or cleaned regularly. However, due to some reason, the technicians of the air shower supplier could not solve the problem in time. At this time, the user manufacturer needs to replace or clean it. How to replace the HEPA filter in the air shower room? What problems should be paid attention to when replacing or cleaning? Next, read in accordance with the small series to understand the matters needing attention when replacing the HEPA filter in the air shower room!
1. Regular use of various technical indicators of the instrument and measurement equipment. If it does not meet the requirements of technical parameters, it should be dealt with in time.
2. Regularly replace the air filter according to actual usage.
3. When you find that the wind speed becomes smaller, please first check whether the surface of the air filter is black. If it is black, it means that there is more dust on the pre-filter and increased resistance, that is, the main air filter should be replaced.
4. After replacing the air filter in the air-conditioning room once, the wind speed cannot be increased, which indicates that the high efficiency air filter has been blocked and the resistance has increased. The high efficiency air filter should be replaced.
5. When replacing the high-efficiency air filter, the nozzle plate must be removed, the high-efficiency filter must be taken out, and the new high-efficiency air filter should be replaced according to the specifications of the original high-efficiency filter. During the installation process, the arrow mark on the high efficiency filter should be confirmed, and the arrow should point to the direction of the airflow. And to ensure a good seal to prevent leakage.
6. After replacing the high-efficiency filter, it is necessary to confirm that the rack is not leaking, and use a dust counter to detect it, and then reach the technical indicators, before normal operation.
7.Air showerMaintain the door regularly to align the electronic lock with its key hole to prevent the lock pin from getting stuck.
8. Regularly maintain and repair the circuit. If there is any failure, please refer to the electrical schematic diagram for maintenance.
9. The temperature of the equipment should not exceed 50°C, and open flames are strictly prohibited.