Views:0 Author:Site Editor Publish Time: 2021-02-21 Origin:Site
GeneralAir showerIt is a special channel specially set up for work management personnel and materials to enter the clean room. The main purpose of the company is to reduce the dust and bacteria we bring into the clean room when the staff and materials enter the clean room. At the same time, it is to develop the airlock room to play the role of a closed clean room. Installed between the clean room and non-clean room environment, it is a necessary passage for entering the clean room. Why do clean rooms and sterile rooms need to install air showers?
The air shower room uses a high-efficiency air filter to filter the air flow, and then sprays the workers and materials from different directions through a rotating nozzle, thereby removing and reducing dust particles on the surface of the people and materials. The dust air is recirculated through the primary and high-efficiency filters. The overall design of the air shower room is a combination of power and fluid. It is a fully automatic infrared sensor shower. The entire process is operated by human voice prompts. The double-door interlock is used, and the door cannot be opened or left at the same time. The two doors of the working air shower room should be closed for forced showering.
The equipment management in the air shower room is generally pre-filter, main filter, air jet and blower. The filtration technology efficiency of the pre-filter is about 15%. The main purpose is to remove some relatively coarse dust particles, and this filter system device design can be used to wash the dust by using water washing or a vacuum cleaner market; the main filter is mainly to filter the dust above 0.3um, which is basically 99.99% The above filtering efficiency is very fragile for this kind of information filtering equipment resource department, so when the company has traffic jams, it must be re-analyzed and processed; the main reason for the air jet is to remove the dust particles attached to the human body. The problem of the effect achieved is to strip the particles; the blower is mainly used to produce a clean cycle of air quality.